JLUdata
https://jlupub.ub.uni-giessen.de//handle/jlupub/1
Forschungsdatenrepositorium2024-03-29T15:41:27ZSupplemental Material for "Wealth for Health? Affordability of a Healthy and Sustainable Diet - A Food Basket Study"
https://jlupub.ub.uni-giessen.de//handle/jlupub/19115
Supplemental Material for "Wealth for Health? Affordability of a Healthy and Sustainable Diet - A Food Basket Study"
Arendt, Svenja
This dataset contains Supplemental Material 4 for the publication "Wealth for Health? Affordability of a Healthy and Sustainable Diet – A Food Basket Study"
The file provides:
- Assessed prices for conventional and organic food products in REWE with product name, price and quantity
- Assessed prices for conventional and organic food products in ALDI Süd with product name, price and quantity
- Amounts in g/day for the heavy meat consumption diet
- Quantities per day and month for the girl in the reference family
- Quantities per day and month for the boy in the reference family
- Quantities per day and month for the mother in the reference family
- Quantities per day and month for the father in the reference family
- Amounts in g/day for the moderate meat consumption diet
- Quantities per day and month for the girl in the reference family
- Quantities per day and month for the boy in the reference family
- Quantities per day and month for the mother in the reference family
- Quantities per day and month for the father in the reference family
- Amounts in g/day for the light meat consumption diet
- Quantities per day and month for the girl in the reference family
- Quantities per day and month for the boy in the reference family
- Quantities per day and month for the mother in the reference family
- Quantities per day and month for the father in the reference family
- Calculation of total cost and affordabiliy
- Calculation of cost shares
- Calculation of the share of vegetables and fruits according to the BMEL
- Creation of graphs
- References
2024-03-01T00:00:00ZTomography Data - Visualizing the Impact of the Composite Cathode Microstructure and Porosity on Solid-State Battery Performance
https://jlupub.ub.uni-giessen.de//handle/jlupub/19097
Tomography Data - Visualizing the Impact of the Composite Cathode Microstructure and Porosity on Solid-State Battery Performance
Minnmann, Philip; Schubert, Johannes
The dataset contains tomography data of three composite cathodes (labelled as BM10, BM03, BM01) obtained by FIB-SEM tomography.
The dataset contains three subsets:
1. unprocessed SEM images (obtained with the BSE and the SE detector)
2. processed and segmented images
3. Numpy arrays of the tomographies which can be loaded using Python
During processing the SEM images were aligned and cropped. Therefore, the dimensions of the segmented tomographies are not identical with those of the raw SEM images.
The numpy arrays consist of:
0 - voids
1 - cathode active material
2 - inorganic solid electrolyte
3 - unknown impurity (only for BM01)
BM10: Dimensions (774, 900, 790); Phases (0, 1, 2)
BM03: Dimensions (713, 850, 413); Phases (0, 1, 2)
BM01: Dimensions (681, 1143, 813); Phases (0, 1, 2, 3)
2024-03-20T00:00:00ZData of TiVO2 on TiO2(110)
https://jlupub.ub.uni-giessen.de//handle/jlupub/19066
Data of TiVO2 on TiO2(110)
Lu, Hao
This data is raw XRD and Raman data of TiVO2 films on TiO2(110). Angle and temperature-dependent Raman spectroscopic measurements were performed using a Renishaw inVia Raman microscope system. Series of Raman spectra in the temperature range between 0 °C and 80 °C were recorded using a Linkam THMS 600 temperature stage. The spectra were taken in backscattering geometry with 514 nm excitation provided by an Ar-ion laser. Excitation and scattered light passed through a long distance objective (50 ×, Olympus, NA = 0.45). The Rayleigh scattered laser light was rejected by an edge filter enabling the measurement of the Stokes Raman scattered light down to 100 cm-1. The laser power on the sample was 1.9 mW and the spot size about 1 µm. Using polarization optics in the beam path allowed us to measure Raman spectra in parallel and crossed polarization configuration of laser and Raman scattered light. Angle-dependent measurements were realized on the same spot on the sample by rotating the polarizer arrangement in the beam path. Angle alpha is between [001] direction of TiO2 substrate and incoming polarization. Angle-dependent Raman measurements were performed at room temperature with Angle alpha from 0 to 360 degrees in 10 degree steps.Angle-dependent Raman measurements were performed at 80 °C with Angle alpha from -90 to 450 degrees in 15 degree steps.
X-ray diffraction (XRD) traces Panalytical X'Pert Pro MRD setups using the Cu-Kα line and an additional sample heater to reach temperatures between room temperature and 80 °C.
The sample’s electric resistance as a function of temperature was measured by using a linear four-contact geometry and a heater stage. Either tungsten carbide or steel needles with a diameter of 0.5mm were used as contacts. The total force applied to the needles was about 5 to 16 N. The distance between probes was 1 ± 0.01 mm. The resistance measurements were performed in autoranging mode. The heating rate was 2 °C/min.
2024-03-02T00:00:00ZData for "The enol of propionic acid"
https://jlupub.ub.uni-giessen.de//handle/jlupub/19089
Data for "The enol of propionic acid"
Danho, Akkad
IR and UVVis-spectra.
A Sumitomo cryostat system consisting of an RDK 408D2 closed-cycle refrigerator cold head and an F-70 compressor unit was used for matrix isolation experiments.
A polished CsI window was mounted in the cold head sample holder. The sample holder, connected with silicon diodes for temperature measurements, was covered by a vacuum shroud, which was equipped with KBr windows to allow for IR measurements. In some experiments BaF2 windows were used due to their higher transparency when measuring UV/vis spectra.
The sample and the host gas (Ar, purity of 99.999%) were co-deposited at 3.5 K. All spectral data were collected at 3.5 K. The pyrolysis zone was equipped with a heatable 90 mm long quartz tube (inner diameter 7 mm), controlled by a Ni/CrNi thermocouple. The travel distance of the sample from the pyrolysis zone to the matrix was ∼45 mm. Ar was stored in a 2 L gas balloon, which was evacuated and filled three times before every experiment. The sample was evaporated from a Schlenk tube at 70 °C (water) and reduced pressure (∼3 × 10–6 mbar) and co-deposited with a high excess of argon on both sides of the matrix window in the dark (preventing unwanted photochemistry) at a rate of ∼1 mbar min–1, based on the pressure inside the Ar balloon.
Pyrolyses were carried out at 500 °C. IR spectra were recorded between 7000 and 350 cm–1 with a resolution of 0.7 cm–1 with a Bruker Vertex 70 FTIR spectrometer.
A spectrum of the cold matrix window before deposition was used as background spectrum for the subsequent IR measurements.
UV/vis spectra were recorded between 190 and 800 nm with a resolution of 1 nm with a Jasco V-760 spectrophotometer.
A high-pressure-mercury lamp equipped with a monochromator (LOT Quantum Design) or a low-pressure-mercury lamp (Gräntzel) fitted with a Vycor filter were used for irradiation of the matrix during photochemical experiments.
Spectra were saved as "X-files" and can be opened with "OPUS".
Computations.
All DFT computations were performed with the Gaussian 16,1 Revision C.01 (full citations for electronic structure codes are given at the end of this document) at the B3LYP/def2-TZVP2-3 level of theory. The keywords Opt and Freq=NoRaman were used for the characterization of minima on the PES. For transition structures the keyword Opt=(ts,tight,calcfc,noeigen) was used. UV/Vis absorptions were computed by using the keyword td(50-50,nstates=10).
The results of the calculations were saved as "out" files and can be opened with the editor and graphically with 'ChemCraft'.
2023-08-25T00:00:00ZData for "The Enol of Isobutyric Acid"
https://jlupub.ub.uni-giessen.de//handle/jlupub/19079
Data for "The Enol of Isobutyric Acid"
Danho, Akkad
Spectra for deuterated and non-deuterated enols, along with density functional theory computations
IR and UVVis-spectra.
A Sumitomo cryostat system consisting of an RDK 408D2 closed-cycle refrigerator cold head and an F-70 compressor unit was used for matrix isolation experiments.
A polished CsI window was mounted in the cold head sample holder. The sample holder, connected with silicon diodes for temperature measurements, was covered by a vacuum shroud, which was equipped with KBr windows to allow for IR measurements. In some experiments BaF2 windows were used due to their higher transparency when measuring UV/vis spectra.
The sample and the host gas (Ar, purity of 99.999%) were co-deposited at 3.5 K. All spectral data were collected at 3.5 K. The pyrolysis zone was equipped with a heatable 90 mm long quartz tube (inner diameter 7 mm), controlled by a Ni/CrNi thermocouple. The travel distance of the sample from the pyrolysis zone to the matrix was ∼45 mm. Ar was stored in a 2 L gas balloon, which was evacuated and filled three times before every experiment. The sample was evaporated from a Schlenk tube at 80 °C (water) and reduced pressure (∼3 × 10–6 mbar) and co-deposited with a high excess of argon on both sides of the matrix window in the dark (preventing unwanted photochemistry) at a rate of ∼1 mbar min–1, based on the pressure inside the Ar balloon.
Pyrolyses were carried out at 750 °C. IR spectra were recorded between 7000 and 350 cm–1 with a resolution of 0.7 cm–1 with a Bruker Vertex 70 FTIR spectrometer.
A spectrum of the cold matrix window before deposition was used as background spectrum for the subsequent IR measurements.
UV/vis spectra were recorded between 190 and 800 nm with a resolution of 1 nm with a Jasco V-760 spectrophotometer.
A high-pressure-mercury lamp equipped with a monochromator (LOT Quantum Design) or a low-pressure-mercury lamp (Gräntzel) fitted with a Vycor filter were used for irradiation of the matrix during photochemical experiments.
Spectra were saved as "X-files" and can be opened with "OPUS".
Computations.
All DFT computations were performed with the Gaussian 16,1 Revision C.01 (full citations for electronic structure codes are given at the end of this document) at the B3LYP/def2-TZVP2-3 level of theory. The keywords Opt and Freq=NoRaman were used for the characterization of minima on the PES. For transition structures the keyword Opt=(ts,tight,calcfc,noeigen) was used. UV/Vis absorptions were computed by using the keyword td(50-50,nstates=10).
The results of the calculations were saved as "out" files and can be opened with the editor and graphically with 'ChemCraft'.
2024-01-01T00:00:00ZPolymorphism and White Light Emission of 1-Bromo-3,5,7-Triphenyladamantane compared with 1,3,5,7-Tetraphenyladamantane
https://jlupub.ub.uni-giessen.de//handle/jlupub/19065.2
Polymorphism and White Light Emission of 1-Bromo-3,5,7-Triphenyladamantane compared with 1,3,5,7-Tetraphenyladamantane
Saravanan, Gowrisankar; Fokin, Andrey A.; Becker, Jonathan; Mathew, Neeshma; Schmedt auf der Günne, Jörn; Schreiner, Peter R
Surprisingly, the crystal structures of bromophenyl adamantanes finely depend on two flavors of London dispersion (LD) interactions: relatively strong CH−π and quite weak Br⋯Br interactions. Here we report our investigation of 1-bromo-3,5,7-triphenyladamantane (1, BrAdPh3) and elucidation of two polymorphic crystal structures denoted as 1A and 1B using single crystal X-ray diffraction (SCXRD). In the monoclinic crystal system of 1A (P21/n space group), we observed CH−π interactions, while Br···Br interactions were absent. Conversely, the Br···Br interactions are a structure-defining factor in the formation of the monoclinic crystal system of 1B (R3 ̅ space group). To provide context, we compare our findings with 1,3,5,7-tetraphenyladamantane (2), characterized by numerous CH−π interactions orchestrating the molecules into chains in the solid. Both CH (phenyl) and CH2 (adamantane) groups thereby participate as dispersion energy donors (DEDs). Computational analyses were employed to investigate the interactions within the characteristic dimers present in the unit cells of 1A and 1B, including visualization of noncovalent interactions and the use of the atoms-in-molecules approach, and molecular orbital analysis. These support the notion of LD dimer-dimer interactions in 1A between the phenyl moieties, whereas 1B exhibits additional dimer-dimer Br···Br contacts. In contrast, the crystals of 2 are exclusively held together by CH−π stacking LD interactions, a feature absent in the polymorphs of 1. Both polymorphic forms of 1 emit white light when subjected to 900 nm continuous wave laser irradiation, displaying a subtle blue shift compared to 2. The absence of CH−π stacking interactions between the dimers of 1 causes a small red-shift in the emission spectrum.
The NMR, SCXRD and Computation files are included in this dataset.
2024-01-01T00:00:00ZUmfragedaten zur Untersuchung der anwaltlichen Beratungshilfe im Rahmen einer juristischen Dissertation (Befragung von Rechtsanwälten)
https://jlupub.ub.uni-giessen.de//handle/jlupub/18859
Umfragedaten zur Untersuchung der anwaltlichen Beratungshilfe im Rahmen einer juristischen Dissertation (Befragung von Rechtsanwälten)
Lefèvre, Julia
Diese Untersuchung wurde als Teil einer Dissertation durchgeführt und richtet sich an Rechtsanwälte in Deutschland, die im Bereich des Zivilrechts tätig sind. Ziel der Studie war es, zu analysieren, inwiefern Rechtsanwälte ihre beruflichen Pflichten gemäß § 49 a Abs. 1 BRAO wahrnehmen. Diese wurden mittels eine Online-Umfrage befragt. Für dessen Erstellung kam die Software LimeSurvey Version 3.23.1+200825 zum Einsatz, bereitgestellt durch eine Lizenz der Justus-Liebig-Universität (JLU). Der Fragebogen, der sowohl offene als auch geschlossene Fragen umfasste, wurde über einen Link auf der LimeSurvey-Plattform zur Verfügung gestellt. Die Auswertung der geschlossenen Fragen erfolgte quantitativ mit der Software IBM SPSS Statistics für Windows, Version 26, wobei deskriptive statistische Analysen durchgeführt wurden. Zwei der im Fragebogen offen gestellten Fragen wurden mittels qualitativer zusammenfassender Inhaltsanalyse unter Verwendung der Software f4analyse (https://www.audiotranskription.de/f4analyse/) analysiert und diese Ergebnisse ergänzend zur deskriptiven statistischen Analyse in die Dissertation aufgenommen. Die Rohdaten der kompletten Umfrage können hier eingesehen werden.
2024-02-28T00:00:00ZHistology sections and scanning electron micrographs of floral buds of Pteridophyllum racemosum
https://jlupub.ub.uni-giessen.de//handle/jlupub/19054
Histology sections and scanning electron micrographs of floral buds of Pteridophyllum racemosum
Kong, Doudou
The size of a single photo is about 14MB. The size of a single SEM photo is about 1.25MB. Both SEM graphs and histology sections graphs are formatted as ".TIFF" and can be opened using any image viewer.
2024-02-29T00:00:00ZSupplemental Data for "Survey of drug use and its association with herd-level and farm-level characteristics on German dairy farms"
https://jlupub.ub.uni-giessen.de//handle/jlupub/19031
Supplemental Data for "Survey of drug use and its association with herd-level and farm-level characteristics on German dairy farms"
Abdallah, Mies
The data set contains supplementary tables for paper: "A". This is a voluntary survey of the use of medicines on 50 dairy cow farms in Germany for the year 2020. The tables contain information on the questionnaire used, the farm parameters surveyed, the classification of the regions, the groups of active substances identified, extended information on the statistical tests and the frequencies of the documented diagnoses.
2023-12-13T00:00:00ZCode and Data for "S100Z is expressed in a lateral subpopulation of olfactory receptor neurons in the main olfactory system of Xenopus laevis"
https://jlupub.ub.uni-giessen.de//handle/jlupub/18919
Code and Data for "S100Z is expressed in a lateral subpopulation of olfactory receptor neurons in the main olfactory system of Xenopus laevis"
Kahl, Melina; Hassenklöver, Thomas
This repository contains Python scripts that were used to analyze the distribution of manually identified cells in the olfactory system. Multiphoton microscopy image stacks of immunohistochemically labeled olfactory system tissue were manually annotated using the ImageJ ROI Manager tool. Regions of interest were exported from ImageJ as roi-files (provided as zip-archive). We include two datasets that were analyzed using these scripts. The datasets comprise of the imported ROI informations, experiment metadata, and results of calculations performed with the Python scripts.
code.py: Script collection to analyze regions of interest drawn using the ImageJ ROI Manager tool.
rois_from_imagej.zip: Roi-files exported from ImageJ. Subfolders contain s100z/biocytin labeled cells in different samples.
biocytin_cell_counts.csv: Dataset of biocytin-backfilled olfactory receptor neurons
s100z_cell_counts.csv: Dataset of human S100Z antibody labeled cells
2024-02-05T00:00:00Z